The Infinity Rabbit / Chandelle - AR2002

Adjustments

The Rabbit / Chandelle is a manually adjusted machine. Once adjusted to the desired position, it will continue to replicate the same target flight path.

All position and spring tension adjustments can be done with a ¾” wrench.

The machine has a total of 25°of tilt adjustment and 75° of total elevation adjustment.

Easily Switch between Rabbit and Chandelle

Switching between Rabbit and Chandelle presentations takes only a few minutes. It is as simple as switching the arm and adjusting the target brushes. No need to remove the side shield or change the launch plate.

There are four arms available for this machine. Below is a list of the available arms as well as the associated part numbers:

Standard Rabbit Arm Assembly-AL554A (Included with AR2002)

High Angle Rabbit Arm Assembly-AL554HAA

Chandelle Arm-AL454A (Included with AR2002)

High Angle Chandelle Teal Arm-AL454HA

The Standard Rabbit Arm and Chandelle Arm come with the machine. The High Angle Rabbit Arm and the High Angle Chandelle Teal Arms can be purchased as accessories.

The Standard Rabbit Arm allows for a traditional rabbit target presentation along the ground or an arcing target above the ground. The High Angle Rabbit Arm allows a rabbit target to be thrown at a nearly vertical trajectory to the machine. The Chandelle Arm allows the machine to throw a standard domed target on edge in an arcing presentation. The High Angle Chandelle Teal Arm allows the machine to throw a standard domed target higher into the air, up to a nearly vertical trajectory.

Rabbit/Chandelle Arm Change Instructions

Springs

Three different springs are offered for Lincoln Automatic Traps.

The Gray spring yields the slowest target speed and shortest throwing distance.

The Yellow spring results in moderate target speed and throwing distance.

The Blue spring provides the fastest target speed and furthest throwing distance.

One spring is included with each machine; however, springs can be changed at any time for additional versatility.

Spring choice is selected at the time the order is placed.

Power

All Lincoln Automatic machines require 12 Volt power which can be supplied in multiple ways.

Batteries are a common method of powering machines; the ODYSSEY ODX-AGM24M is recommended but similar battery models are also suitable. The Minimum Battery Requirement is a Marine Grade Deep Cycle - Group 24 with minimum of 500 CCA & 800 MCA. A Group 27 or 31 sealed battery is recommended for best performance. 

Batteries require charging which can be done using a plug-in battery charger or a regulated solar panel.

Solar panels add convenience as they eliminate the need to move batteries from machines to chargers. Lincoln Traps offers the SW25WA, a regulated 20-watt solar charging kit that works with any 12 VDC battery.

If the machine will be located in a house or near a power source, a transformer is an option for powering the machine. Lincoln Traps offers the PM45A transformer package which is compatible with all Lincoln Automatic machines.

Warranty

Lincoln Traps offers a 5 year warranty on the clutch with a 2 year warranty on the rest of the machine.

This warranty does not include normal wear items or damage due to weather or natural disasters. Technical support is available for the life of the machine.

Release

Firing the machine is via a release cord or a Long Range Wireless TrapRelease.

Release cords can be made to custom lengths per customer request.

Long Range offers a variety of products to satisfy all uses.

Magazine

The Rabbit / Chandelle machine can be ordered with two different magazine options. The larger, more common magazine option holds 360 rabbit targets or 400 standard targets. The smaller option holds 280 rabbit targets or 320 standard targets.